Air Match 600


Air Match 600 - pic courtesy of Joe Giunti

While perusing the owners manual it becomes apparent that they did not employ the services of somebody who actually speaks fluent "gun" English. The following is the introduction:
"The firm Air Match was established in 1979. Formed of highly qualified technicians who come from target branch, it is successful in the air arms branch at once thanks to van methods."
For this reason I apologise if I have misunderstood any of the instructions in the manual. Where possible I checked with the French translation, but this may not be reliable either.

Sight Adjustments

Clockwise down.
Clockwise right.

Trigger Adjustments

1. Adjusting screw for length of first stage.
2. Adjusting screw for first stage weight.
3. Adjusting screw for trigger pull weight.
4. Adjusting screw for second stage.

Other "Helpful" Hints

The cylinder must never be lubricated.

"Do not touch the valve and do not tamper with the gun prior to warranty expiry date." (Apparently it's okay to butcher it to your heart's content AFTER warranty has run out.)

Air Match 600 trigger adjustments

Changing Rear Sight Blade

Screw on right side of rear sight base is lock screw for rear sight blade. Loosen to remove old blade, replace with new blade and retighten screw (see diagram).

Removing rear sight blade.

Dry Fire Facility

To fire pistol normally put switch in position 4.
To dry fire swing forward to position 5.


Dry fire switch

Manual for the Air Match 600 in PDF format