PilkGuns | Pilkington Competition of Monteagle, Tennessee

Rifle Accessories

Special Rifle Shooting Needs

ELECTRONIC TRAINER: The ultimate in training devices, the RIKA Home Trainer - your coach in a box.

SCUBA air safety

Hill Pumps

Hill High Pressure Hand Pump
by Ernest H. Hill, Sheffield, England
since 1841

Hill Pump

200 DIN fitting

Hose Fitting

Quick Release Coupling

The included DIN fitting is suitable for adaptors of all sorts of 10m Match air pistols and rifles including STEYR, MORINI, FEINWERKBAU, ANSCHUTZ, HAMMERLI, WALTHER and many others. The hose fitting, with 1/8 BSP cone seat swivel connector, suits many QD fittings for FT and sporting pre-charged air rifles. An additional adapter may be needed to suit your gun and cylinder.
Also available is the Quick Release Coupling which converts the 1/8" BSP standard pump outlet for rapid hose connection.
Patented design which allows filling to 230 BAR.
Features safety bleed valve, moisture trap and built-in pressure gauge.
The only pump to feature a replaceable filter.
ISO 9001 Quality Assured.
12 month warranty.

Pump Specifications:
LENGTH: 25"	WEIGHT: 7 lb
MAXIMUM PRESSURE: 230 BAR (3300psi)

Filling Air Cylinders with a Hand Pump

Universal Dry Pac Kit Instructions

Dry-Pac Instructions

Pump Assembly and Maintenance

Seal Replacement

Replacing Micron Filter

Retro Fit Dry-Pac Instructions

Dry-Pac Test Results

Micron Filter Kit

Pressure Gauge

Pump and parts (refill and replacement)

Dry-Pac

The Dry-Pac moisture removal system is another new ground-breaking innovation from Hill. This system answers any lingering concerns about moisture and hand pumps.

Unique to the market, the Hill Dry-Pac system is a patented method of actively removing moisture utilizing a specially formulated medium and sintered filters. The Dry-Pac moisture elimination kit is available for late model Hill pumps.

Note: If you purchase a Hill High Pressure Hand Pump and the Hill Dry-Pac system, we will include an extra package of Dry-Pac filter medium.

Hill Dry Pac unit

Air Pressure Gauge

Screws into all pistol cylinders, as well as LG1P and LP10P rifle cylinders.

sac19.jpg - 13572 Bytes

LG100 Filling Adapter

Please call for ordering information.

K Valve to DIN Yoke

This is the easiest option for a shooter of a PCP airgun to fill from an existing SCUBA tank set up with a K valve. Fits in seconds.

Steyr Sight Set

Steyr Match Rifle Sight Set

As used on LG10, LG100, etc. These are able to be set up for cant, and take standard Anschutz front sight inserts. We have a limited number of these sight sets - new and unused. They will fit Anschutz with minor modification to front sight dovetail (rear slides straight on).

sac20.jpg - 6212 Bytes

LG100 Riser Block Set

Includes integral front sight on block.

	LG100 Weights Stock weight set (3 x 100g) 100g barrel weight (steel) 60g shroud weight (aluminum)
	B96 Magazines Suits the Steyr LGB1 and Haenel-Suhl B96 Biathlon trainer rifles. 5-shot or single shot.

Note: Pricing information for the above and other Steyr Rifle Accessories

AHG Cleaning Kit for Rifles and Pistols

TSI301 Lubricant

NOTICE: TSI301 contains a solvent and is not recommended for use on plastics but ideal for use with metals.

TSI301 is a specially formulated lubricant which sinks into the pores of metal. Very little is required to take advantage of its excellent lubricating properties. Even when the surface of metal appears to be dry, the TSI301 is present, doing its job. It creates a thin film which tends to uproot corrosion or contaminants. It bonds itself to the surface of the metal through physical adsorption reducing surface tension, practically eliminating friction and reducing wear. It does not build up into gummy deposits. Some advantages over other lubricants are:

• TSI301 Cleans away rust and contamination better
• Low viscosity means superior lubrication efficiency
• Penetrates faster
• Does not attract dust, dirt or lint
• Displaces water better
• Increased wear protection
• Wider temperature range (-60°F to +450°F)
• Reduced residue
• Less flash and fire hazard. It has no flash point. It is safe to use near fires and hot metals.
• Withstands extreme pressure
• Does not conduct electricity (anti-static)
• Prevents seizure
• Will not stain

3 oz aerosol can * cannot be shipped by air

TSI321 Lubricant

NOTICE: TSI321 does NOT contain a solvent and is highly recommended for use where plastics are present

TSI321 was developed for use by N.A.S.A. in the Apollo Program. 321 is unique because of the extreme temperature range in which it operates as well as its ability to bond with the metal creating a thin film of lubrication without a greasy buildup. 321 is non-electrolytic. It will prevent metal corrosion and is not harmful to plastics or high alloy metals. Its unique properties have created a number of unusual applications for it such as camera lubrication and photograph polishing.

TSI321 4 oz squeeze bottle

Super Lube® Grease

Super Lube® Grease is a patented synthetic NLGI grade 2 heavy-duty, multipurpose lubricant with PTFE. Synthetic base fluids and the addition of PTFE micro powders
combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity
is increased. Super Lube® is compatible with most other lubricants and will not run, drip, evaporate or form gummy deposits, and will not melt or separate.

Super Lube® is Food Grade, rated H-1 by the USDA and NSF for incidental food contact. It is an excellent Dielectric and operates over a temperature range from -45° to 450° F.

footer